Oregon Scientific BPW221 User Manual page 10

Problem Symptom
No power Display is dim
or will not light
up.
Low shows on
batteries the display.
Error shows on
message the display.
1, 2, or 3
shows on the
display.
4 shows
on the display.
5 shows
on the display.
Check this Remedy
Batteries are Replace with
exhausted. new batteries
( 6).
Batteries are Insert the
inserted batteries
correctly( 6).
incorrectly.
Batteries are Replace with
low. new batteries
( 6).
A
Relax for a
measurement
moment and
error
then measure
occurred.
again.
The wrist
Refasten the
cuff is not
cuff and then
secure. measure
again ( 7).
The monitor Movement
detected
can affect
motion while
the
measuring measurement.
Relax for a
moment and
then measure
again.
Relax for a
Pressure
is over moment and
280mmHg then measure
again.
(37.3 kPa)
Problem Symptom
Error 6 shows
message on the
display.
7 or 8
shows on
the display.
S e t t i n g s
Date and
are wrong
time are
incorrect.
Measurement
unit (mmHg
or kPa) are
incorrect.
10
Check this Remedy
Deflation Movement can
period was affect the
too long measurement.
Relax for a
moment and then
measure again.
A calibration Retake the
error measurement. If
occurred the problem
persists, contact
the retailer or our
customer service
department for
further
assistance. Refer
to the warranty
for contact
information and
return
instructions.
The clock Reset the clock
was not set ( 6).
or reset after
installing new
batteries.
The Reset the
measurement measurement
unit was not unit
set or reset ( 6).
after installing
new batteries.