Pedals; R1 Water Bottle Holder & Bracket - Life Fitness LIFECYCLE R1 Owner's Manual

15mm Open End Wrench
Locate the RIGHT PEDAL (JJ) (marked with an "R") and PEDAL STRAP (KK)
(marked with an "R"). With the side of the PEDAL STRAP marked with an "R" fac-
ing upward, slide the slotted end of the PEDAL STRAP through the left slot in the
PEDAL. Fasten one of the slots onto the tab located under the left slot of the
PEDAL. Bend the PEDAL STRAP upward and slide the remaining end of the
PEDAL STRAP through the right slot in the PEDAL and into the strap adjustment
clip. The PEDAL STRAP should securely engage the strap adjustment clip.
Install the RIGHT PEDAL (JJ) to the USER RIGHT CRANK ARM (LL).
Repeat for the LEFT PEDAL (marked with an "L") and PEDAL STRAP (marked
with an "L").
Note:
Note:
Hardware Bag #4
Phillips Screwdriver
Locate the WATER BOTTLE BRACKET (MM). Secure the WATER BOTTLE BRACKET to the underside of the MONO-
COLUMN (S) using two 12mm PHILLIPS SCREWS (12). Tighten the SCREWS securely. Insert the WATER BOTTLE
(NN) into the WATER BOTTLE BRACKET.
(2, 12mm Phillips Screws)
15