Connecting; Connect To Power; Dock Headset - Jabra 9450 User Manual

2. CONNECTING

LAUNCH THE INTERACTIVE SETUP WIZARD ON THE CD FOR ANIMATED SETUP INSTRUCTIONS
The easiest way to connect and configure the Jabra PRO 9450 is to use the Interactive Setup Wizard on the
installation CD. Chapters 2 and 3 of this manual are only needed if the Interactive Setup Wizard is not used.
Refer to the Warning and Declaration guide for important safety instructions prior to installation and use of the
Jabra PRO 9450.
2.1

CONNECT TO POWER

Connect the Power Adapter to the Base
1. Plug the supplied power adapter into the port marked
2. Connect the power adapter to the mains power socket.
2.2

DOCK HEADSET

Dock the headset, as illustrated. When the headset is docked correctly the headset battery will begin charging, if
needed. Keep the headset docked while connecting the Jabra PRO 9450, or when not in use.
on the base.
JABRA PRO 9450
11