Connecting To Your Telephone - Jabra ACTIVA User Manual

Figure 2
Figure 3
Figure 4

Connecting to your telephone

1. First, connect the headset cord to the Quick Disconnect coil cord. (Figure 2)
2. If your telephone has a socket for a headset connection, insert the modular plug at
the end of the headset cord into the headset port on the telephone. If your telephone
does not have a port for a headset connection, disconnect the handset cord from the
telephone. Insert the modular plug at the end of the headset cord into the handset
port. (Figure 3)
3. If you have purchased the optional headset/handset switch, install by following these
steps: (Figure 4)
a. Connect the headset to the headset port on the switch.
b. Connect the cord from the handset to the handset port on the switch.
c. Connect the handset port on your telephone to the telephone port on the switch
with the modular cord provided with the switch.
d. Select the headset or handset mode as needed.
Warning
The headset contains its own built-in amplifier circuit. Do not connect the headset to any
headset amplifier. The headset is equipped with a GN Netcom quick disconnect for
convenience only.
3