Table of Contents
Advertisement
Additional Safety for Table Saws
1.
SAFETY ACCESSORIES.
ations are those when the blade cuts com-
pletely through the workpiece.
2. KICKBACK.
Until you have a clear under-
standing of kickback and how it occurs, DO
NOT operate this table saw!
3. WORKPIECE CONTROL.
4. PUSH STICK.
5. OPERATOR POSITION.
6. AWKWARD OPERATIONS.
Like all machines there is danger associ-
ated with the Model G0674. Accidents are
frequently caused by lack of familiarity or
failure to pay attention. Use this machine
with respect and caution to lessen the pos-
sibility of operator injury. If normal safety
precautions are overlooked or ignored, seri-
ous personal injury may occur.
Through-sawing oper-
7.
RIVING KNIFE ALIGNMENT.
8. REACHING OVER SAW BLADE.
back occurs while reaching over the blade,
hands or arms will be pulled into the spin-
ning saw blade.
9. RIP FENCE AND CROSSCUT FENCE
USAGE.
10. CUT-OFF WORKPIECES.
11. BLADE HEIGHT.
12. DAMAGED SAW BLADES.
13. EXPERIENCING DIFFICULTIES.
No list of safety guidelines can be complete.
Every shop environment is different. Always
consider safety first, as it applies to your
individual working conditions. Use this and
other machinery with caution and respect.
Failure to do so could result in serious per-
sonal injury, damage to equipment, or poor
work results.
If kick-
OFF
Advertisement
Table of Contents
