Advertisement
User Mode
This mode gives you the capability of enabling and disabling individual wireless keys that have been
directly programmed into the
This mode may only be accessed if the FA270RF is powered up for at least 1 minute. Only
wireless keys programmed directly into the FA270RF may be enabled and disabled using this
mode.
ENTER THE USER MODE
Press the [1] and [3] keys simultaneously for a few seconds after the unit has been powered
for at least 1 minute.
CHANGING THE STATUS OF A TRANSMITTER
On the display, "dE" and "-" flashes alternately. Enter the number of the wireless key
transmitter (1-8).
Then "d" and the wireless key number you entered flash alternately with "1" or "0" on the
display. A "1" indicates the wireless key is enabled, a "0" indicates it is disabled. Enter [1] to
enable or [0] to disable the wireless key. All wireless keys are defaulted to 1 (enabled).
Press the [
Repeat the procedure for all the wireless keys whose status you want to change.
EXITING THE USER MODE
To exit the User mode press [
ÊK14035UGlŠ
K14035UG 2/06 Rev. A
. This is particularly useful if a user loses a wireless key.
FA270RF
✱
] to accept the entry.
✱
] when "dE" and "–" flash alternately on the display.
149 Eileen Way, Syosset, NY 11791
www.firstalertprofessional.com
Copyright © 2006 Honeywell International Inc.
Advertisement
