Operate Macro 830/1400/2400 In Bridged Mode; Caution For Application; General Application Instruction - Alto MACRO 830 User Manual

NO USING
CHANNEL A

5.3 Operate MACRO 830/1400/2400 in Bridged Mode

In this mode, the Channel A input signal will be output from the Bridge output connectors. In this case, use the
Channel A volume control to adjust the volume, keep the volume control of Channel B turned completely down
(counterclockwise). Bridged Mode is intended for driving loads with a total impedance of 4 ohms or greater.
NO USING
CHANNEL A

6. CAUTION FOR APPLICATION

6.1 General Application Instruction

The following instructions describe the common ways to install your MACRO 830/1400/2400 Professional Stereo
Amplifier into a sound application system:
1. First, turn off power switch before connection.
2. Refer to Chapter 5 for speaker connection
3. MACRO 830/1400/2400 Professional Stereo Amplifier may be operated in one of the three modes, please slide
the Mode Selector (11) for the specific operating mode.
Input wiring tips
BALANCED UNBALANCED
GND SHIELD
1 1
3 3
2 2
FROM FROM
INPUT INPUT
SOURCE SOURCE
+ +
SHIELD SHIELD
INPUT
CH-B
CONNECTION
(+)
SRT
2 1
LINE 3
T(+)
(GND)
R( )
( )
S(GND)
OFF ON
LF 30HZ
FILTER
BALANCED 1.15V/20K£[
INPUT
BRIDGED
LINE STEREO
PARALLEL
(MONO)
OFF ON
CLIP LIMIT
CH-A
BRIDGED INPUT
BRIDGED
STEREO
PARALLEL
(MONO)
Input wiring tips
BALANCED UNBALANCED
SHIELD
GND
1 1
3 3
2 2
FROM FROM
INPUT INPUT
SOURCE SOURCE
+ +
SHIELD SHIELD
INPUT
CH-B
CONNECTION
(+)
SRT
2 1
LINE
3
T(+)
(GND)
( ) R( )
S(GND)
OFF ON
LF 30HZ
FILTER
BALANCED 1.15V/20K£[
INPUT
BRIDGED
STEREO
LINE
PARALLEL
(MONO)
OFF ON
CLIP LIMIT
CH-A
BRIDGED INPUT
BRIDGED
STEREO
PARALLEL
(MONO)
TO REDUCE THE RISK OF FIRE
B R E A K E R
OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPARATUS TO
RAIN OR MOISTURE.
SEE INSTRUCTION BEFORE
USING!
BRIDGED
MONO
C H A N N E L A C H A N N E L B
Channel B
PIN 1+
PIN 1-
Channel A
PIN 1+
PIN 1-
B R E A K E R
BRIDGED
MONO
C H A N N E L A C H A N N E L B
Channel B+
Channel A+
NO USING
9
WARNING
MODEL
SERIAL
+
+
WARNING
TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPARATUS TO
RAIN OR MOISTURE.
SEE INSTRUCTION BEFORE
USING!
MODEL
SERIAL
+