Table of Contents
Advertisement
The use of a long or bad quality cable and not isolated jacks can cause a loss of the signal level,
it would be preferable to use an RG6 Coaxial cable (HF 17VATC or 19VATC cable), in order to
minimise a signal loss.
how to prepare the cable?
it is important that the coaxial cable does not become damaged or kinked during the installation procedure.
3.4 step 4: fine Tuning and fixing the bracket
Once fine tuning for signal reception is completed, please tighten all bolts and nuts.
Once all connections are made, turn on the TV and the satellite receiver, select the Antenna Pointing
Menu on your receiver and check the signal level on your TV. Do not forget to choose "LNB: ON".
Someone will need to stay in front of the TV to tell you when the signal is "good" while you're
outside adjusting the antenna the best way possible.
The signal level and quality is indicated on the TV screen and will fluctuate and change colour
according to the adjustment & movement of the antenna while you are pointing & finding (azimuth,
elevation angle). The level indicates the power of the signal and the colour indicates the signal
reception quality from the chosen satellite.
6
Connector cover
f-connector
how to connect the cable to the antenna and the
set top box?
one side
to Antenna
Cable
PART 1 • English
other side
to Receiver
Advertisement
Table of Contents
