Slave Mode; Sound Mode - PROEL PLLEDAB8 User Manual

SLAVE MODE

This function mode is utilized so that the projector synchronously works
with the projector in master mode which is connected by a DMX cable.
For all installation, having long signal
cables or in the presence of electrical
noise, for example a discotheque, it is
recommended practice to use a DMX
terminator: this assist in preventing
corruption of the digital control signal
by external noise.
The DMX terminator is simply an XLR connector with a 120Ω (Ohm)
resistor connected across pins 2 and 3, which is then plugged into the
DIGITAL THRU socket on the last projector in the chain.

SOUND MODE

Setting the blinder in Sound Mode, the projector will work in musical
mode. The blinder receives the acoustic signals by the internal
microphone. The same microphone has the possibility to adjust its
sensitivity by rotating the knob sited near the display.
19