PROEL PLLEDAB8 User Manual page 17

Set the desired channel's value (5 or 8 or 14 or 26) by pressing the UP
or DOWN buttons.
Choosing 26 as value, the first channel is occupied from DIMMER, the
second one ad just the STROBE effect and each spotlight occupies 3
channels so that the whole channels occupied from the projector are
26.
CH. EFFECT
1 DIMMER
2 STROBE
3-5 SPOT 1
6-8 SPOT 2
9-11 SPOT 3
12-14 SPOT 4
15-17 SPOT 5
18-20 SPOT 6
21-23 SPOT 7
24-26 SPOT 8
Choosing 14 as value, the first channel is occupied from DIMMER, the
second one ad just the STROBE effect and each spotlight occupies 3
channels so that the whole channels occupied from the projector are
14.
CH. EFFECT
1 DIMMER
2 STROBE
17