Operation Of Wireless Remote Control - York YEHNZH018BAMKAFX User Manual

Operation of wireless remote control

Names and functions of wireless remote control
Note:Be sure that there are no obstructions between receiver and remote controller;
Don't drop or throw the remote control;Don't let any liquid in the remote control and
put the remote control directly under the sunlight or any place where is very hot.
Signal transmitter
Remote control
ON/OFF
ON/OFF button
Press this button, the unit will be turned on,
●
press it once more, the unit will be turned
off. When turning on or turning off the unit,
the Timer, Sleep function will be canceled,
but the presetting time is still remained.
MODE
MODE button
● Press this button, Auto, Cool,Dry, Fan,
Heat mode can be selected circularly.
Auto mode is default while power on.
Under Auto mode,the temperature will not
be displayed; Under Heat mode, the
initial value is 28℃
modes, the initial value is 25℃
AUTO
COOL
DRY
FAN
HEAT
(only for cooling and heating unit.
As for cooling only unit, it won't have
any action when it receives the signal
of heating operation.)
o
( 82 F) ;Under other
o
( 77 F) .
SLEEP
SLEEP button
● Press this button,Sleep On and Sleep
Off can be selected.After powered on,Sleep
Off is defaulted.After the unit is turned
off, the Sleep function is canceled.After
Sleep function set up,the signal of Sleep
will display.In this mode,the time of timer
can be adjusted.Under Fan and Auto
modes,this function is not available.
FAN
FAN button
● Press this button, Auto, Low, Middle, High
speed can be circularly selected. After
powered on,Auto fan speed is default.
AUTO
Low fan
High fan
Note:Under the Dry mode, the fan speed isn't
adjustable, low fan speed is imperative,
but when operating this button, the wireless
adjustable, low fan speed is imperative,
CLOCK
CLOCK button
● Press this button, the clock can be set up,
signal blink and display.Within 5
seconds, the value can be adjusted by
pressing + or - button, if continuously
press this button for 2 seconds above,
in every 0.5 seconds, the value on ten place
of Minute will be increased 1. During blinking,
repress the Clock button, signal
constantly displayed and it denotes the
setting succeeded. After powered on, 12:00
is defaulted to display and signal
be displayed. If there is signal
displayed that denotes the current time
value is Clock value, otherwise is Timer value.
LIGHT
LIGHT button
● Press this button to select LIGHT on or off
in the displayer. When the LIGHT on is
set,the icon
indicator light in the displayer will be on.
When the LIGHT off is set, the icon
be displayed and the indicator light in the
displayer will be off.
6
Middle fan
will be
will
be
will be displayed and the
wil l