Care and Cleaning
●
Disconnect the power supply before cleaning and maintenance.
●
Do not splash water on the units for cleaning, as electric shocks may occur.
●
Wipe the units with a dry soft cloth, or a cloth slightly moistened with water or cleaner (not with
volatile liquid such as thinner or gasoline).
Remove the front panel.
the dirty part of front panel.
Note: Do not immerse the front panel into water so as to protect microcomputer components and circuit
diagram on the front panel.
Note:
Do not to touch the fin of indoor unit during cleaning to avoid personal injury.
Take down the air filter
①
Lift up the front panel.
Pull the air filter downwards to take it off,
as shown in Fig.(a, b) .
Clean the air filter
②
Use a vacuum cleaner to remove dust.
If the filter are dirty, wash them with warm water
and a mild detergent.
Dry the filters in the shade.
Note: Never use water above 45
filter or it can cause deformation or discoloration.
Reinstall the air filter
③
Reinstall the filters along the direction of arrowhead.
Close the panel.
Cleaning the Front Panel
Dip a piece of cloth into the water colder than 45 and dry it.Then wipe
Cleaning the Air Filter (every 3 months)
to clean the air
Caution
14
(
a)
(
b )