LG LVS301 Owner's Manual page 35

To set the Recording Schedule
1. Click the [Add] button. Recording schedule setting
window is displayed.
2. Set the [Pre alarm] and/or [Post alarm] option.
- Pre alarm: Specifies the maximum recording
capacity of the image before the event detection.
- Post alarm: Specifies the maximum recording
capacity of the image after the event detection.
3. Select the Repeat type. It can be configured in 5 dif-
ferent ways, Repeat None, Daily, Weekly, Monthly and
Yearly.
4. Set the [Custom day] option. This option is available
if the repeat option is None. Here a calendar is pro-
vided to mark the event detection activity.
5. Set the Activation Time parameters (24h clock) for
the event.
- NONE: No scheduled recording
- CONTINUITY: Recording starts automatically from
the preset time.
- VA: Recording starts automatically when the
object or event is detected within a designated
time.
- SENSOR: Recording starts automatically when the
sensor input of the IP device is activated within a
designated time.
- DUPLICATED (C,V): Recording starts automati-
cally from the preset time. When the object or
event has been detected within a designated
time, change the continuous recording mode to
VA event recording mode and recording starts
Operation and settings
automatically.
- DUPLICATED (C,S): Recording starts automatically
from the preset time. When the sensor input is
activated within a designated time, change the
continuous recording mode to the sensor event
recording mode and recording starts automati-
cally.
- DUPLICATED (V,S): Recording starts automatically
when the object or event is detected or the sen-
sor input is activated within a designated time.
- DUPLICATED (C,V,S): Recording starts automati-
cally from the preset time. When VA or SENSOR
event is detected, change the continuous record-
ing mode to the VA event recording mode or the
sensor event recording mode.
6. Click the [Save] button to confirm the settings.
35