Beko BK 5200 User Manual page 24

Installation of indoor unit
Note:
Step four: outlet pipe
1. The pipe can be led out in the
direction of right, rear right, left or
rear left.
right
bellmouth.
2. Pretightening the union nut with hand.
wrench on the pipe joint and place the torque wrench on the union nut. Tighten
the union nut with torque wrench.
Indoor
5-10°
2. When select leading out the pipe
from left or right, please cut off the
corresponding hole on the bottom
case.
left
rear left
pipe joint
21
outdoor
right
cut off
the hole
pipe
union nut