Table of Contents
Advertisement
Site considerations
floor Load
the Model g0503 weighs 1870 lbs. and has a
base footprint of 40"w x 39
this machine will be installed must be level and
structurally sound. Most commercial floors are
suitable for your machine. some floors may
require additional reinforcement.
Working clearances
Consider existing and anticipated needs, size of
material to be processed through each machine,
and space for auxiliary stands, work tables or
other machinery when establishing a location for
your saw. see figure 6 for the minimum working
clearances of the Model g0503.
108"
figure 6. working clearances.
unsupervised children and
visitors inside your shop
could cause serious per-
sonal injury to themselves.
Lock all entrances to the
shop when you are away and
DO NOT allow unsupervised
children or visitors in your
shop at any time!
Model g0503 (Mfg. since 12/08)
⁄
"l. the floor where
1
4
Removing Resaw
from the crate pallet
the Model g0503 weighs
1870 lbs. serious per-
sonal injury may occur
if not moved safely. you
will need assistance and
power equipment when
moving the shipping crate
and removing the machine
from the pallet. if you are
unsure of how to lift this
equipment safely, consult
a qualified professional.
Tools Needed
wrench/socket 14mm ...................................... 1
Forklift ................................................................ 1
To remove the resaw from the crate pallet:
1.
remove the lag bolts from the stand feet that
secure the resaw to the crate pallet.
2.
slide the forklift forks into the forklifting points
(shown in figure 7), lift the resaw off of the
pallet and move it to a permanent location.
figure 7. Forklift lifting points.
QTy
-17-
Advertisement
Table of Contents
