Chapter 5 - Selecting Screens; Screen Controls; Main Display Key; Main Display Mode Section - Tascam SX-1 Reference Manual

Screen Controls

You have a choice of using the onboard LCD or a
connected VGA display as your main screen.

Main Display Key

The key selects between the SX-1's
MAIN DISPLAY
onboard LCD screen or an external VGA monitor as
your main display. The LCD always follows the
selection keys in the
MAIN DISPLAY MODES
tion.
To have an external VGA follow these keys, press
and make the associated
MAIN DISPLAY
LED light. The LED indicator set-
<EXTERNAL>
tings are as follows:
When the
<INTERNAL> <INTERNAL>
minated, the screens recalled by the keys in the
section appear on the LCD . If an
DISPLAY MODES
VGA screen is connected, its display will not follow
the
MAIN DISPLAY MODE

Main Display Mode Section

The controls in this section recall different screens.
These screens appear on both the LCD and a con-
nected VGA display (when the
is set to ).
EXTERNAL
The key recalls the
TRACK
TRACK
where tracks are created and edited.
Part II–Monitoring Signals and Selecting Screens
Chapter 5 – Selecting Screens
sec-
LED is illu-
MAIN
keys.
key
MAIN DISPLAY
screen,
TRACK
When the
<EXTERNAL>
the screens recalled by the
keys appear on both the LCD and the external VGA
display at the same time.
TIP
VGA screens can also be changed, independently of the
LCD, by pressing ALT and a number key on a connected
PS/2 keyboard.
This option is available regardless of the MAIN
DISPLAY key's setting.
The LCD also has its own set of dedicated controls in the
LCD ACCESS section.
The key recalls the
MIXER
MIXER
which shows a full console view on the VGA, along
with a channel-at-once view on the LCD.
The
CHANNEL
CHANNEL
screen, which shows all of the parameters
CHANNEL
for a selected channel.
TASCAM SX-1 Reference Manual
LED is on,
<EXTERNAL>
MAIN DISPLAY MODES
screen,
MIXER
key recalls the
MIXER
27