Tidying Cables; Making Connections - LG PN45 Series Owner's Manual

20
ASSEMBLING AND PREPARING / MAKING CONNECTIONS

Tidying cables

1 Install the Power Cord Holder and Power
Cord. It will help prevent the power cable from
being removed by accident.
2 Gather and bind the cables with the Cable
Holder.
(Only 42PN45**)
Cable holder
(Only 50PN45**, 50/60PN65**)
Cable holder
CAUTION
y Do not move the TV by holding the cable
holder and power cord holder, as the cable
holders may break, and injuries and
damage to the TV may occur.
NOTE
y If you install the TV on a Wall, detach the
cable holder from stand body and attach
on protection cover or back cover to
organize the cables.

MAKING CONNECTIONS

This section on MAKING CONNECTIONS
mainly uses diagrams for the PN45** models.
Connect various external devices to the TV and
switch input modes to select an external device.
For more information of external device's con-
nection, refer to the manual provided with each
device.
Available external devices are: HD receivers,
DVD players, VCRs, audio systems, USB stor-
age devices, PC, gaming devices, and other
external devices.
Power cord holder
(Depending on model)
Power cord holder
(Depending on model)
NOTE
y The external device connection may differ
from the model.
y Connect external devices to the TV
regardless of the order of the TV port.
y If you record a TV program on a DVD
recorder or VCR, make sure to connect
the TV signal input cable to the TV
through a DVD recorder or VCR. For
more information of recording, refer to
the manual provided with the connected
device.
y Refer to the external equipment's manual
for operating instructions.
y If you connect a gaming device to the TV,
use the cable supplied with the gaming
device.
y In PC mode, there may be noise
associated with the resolution, vertical
pattern, contrast or brightness. If noise is
present, change the PC output to another
resolution, change the refresh rate to
another rate or adjust the brightness and
contrast on the PICTURE menu until the
picture is clear.
y In PC mode, some resolution settings
may not work properly depending on the
graphics card.