Related Manuals for LG PN65xx
Summary of Contents for LG PN65xx
- Page 1 OWNER’S MANUAL PLASMA TV Please read this manual carefully before operating your set and retain it for future reference. PN45** PN65** www.lg.com P/NO : MFL67648602 (1212-REV01) Printed in Korea...
-
Page 2: Table Of Contents
TABLE OF CONTENTS TABLE OF CONTENTS SAFETy INSTRUCTIONS LICENSES INSTALLATION PROCEdURE OPEN SOURCE SOFTWARE NOTICE ASSEMBLING ANd PREPARING ExTERNAL CONTROL dEvICE SETUP Unpacking Separate purchase Parts and buttons Lifting and moving the TV Setting up the TV - Attaching the stand Mounting on a table Mounting on a wall Tidying cables... -
Page 3: Safety Instructions
SAFETY INSTRUCTIONS SAFETy INSTRUCTIONS Please read these safety precautions carefully before using the product. WARNING y Insert the power cable y Do not place the TV and completely into wall socket. remote control in the following If the power cable is not environments: inserted completely into wall - A location exposed to... - Page 4 SAFETY INSTRUCTIONS y Keep the packing anti- y Do not spray water on the moisture material or vinyl product or scrub with an packing out of the reach of inflammable substance children. (thinner or benzene). Fire or Anti-moisture material is electric shock accident can harmful if swallowed.
- Page 5 SAFETY INSTRUCTIONS y If you don’t intend to use y When installing the antenna, the product for a long time, consult with a qualified unplug the power cable from service technician. If not the product. installed by a qualified Covering dust can cause a technician.
- Page 6 SAFETY INSTRUCTIONS y Please follow the installation y Avoid touching the screen or instructions below to prevent holding your finger(s) against the product from overheating. it for long periods of time. - The distance between the Doing so may produce some product and the wall should temporary distortion effects be more than 10 cm.
- Page 7 SAFETY INSTRUCTIONS y Contact the service centre once a year to clean the internal parts of the product. Accumulated dust can cause mechanical failure. y Refer all servicing to y Displaying a still image (e.g., broadcasting qualified service personnel. channel logo, on-screen menu, scene from a Servicing is required when video game) for a prolonged time may cause the apparatus has been...
-
Page 8: Installation Procedure
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING NOTE y Image shown may differ from your TV. y Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. y The available menus and options may differ from the input source or product model that you are using. y New features may be added to this TV in the future. - Page 9 ASSEMBLING AND PREPARING Power Cord Holder Power Cord Screw for assembly Screw for assembly (See p. 19) (Depending on model) 7 EA, M4 x 14 7 EA, M5 x 16 (Only 42PN45**) (Only 50PN45**, (See p. 15) 50/60PN65**) (See p. 15) Stand Body / Stand Isolator Protection Cover...
- Page 10 ASSEMBLING AND PREPARING NOTE y The items supplied with your product may vary depending on the model. y Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions. How to use the ferrite core 1 Use the ferrite core to reduce the electromagnetic interference in the power cable.
- Page 11 ASSEMBLING AND PREPARING NOTE y Antenna Isolator Installation Guide - Use this to install TV in a place where there is a voltage difference between TV Set and GND of antenna signal. » If there is a voltage difference between TV Set and GND of antenna signal, the antenna contact might be heated and excessive heat might cause an accident.
-
Page 12: Separate Purchase
ASSEMBLING AND PREPARING Separate purchase Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models. LG Audio device Compatibility PN45** PN65** LG Audio device •... -
Page 13: Parts And Buttons
ASSEMBLING AND PREPARING Parts and buttons Screen AUDI Speakers AV IN 2 L/MONO Remote control sensor Buttons Power indicator Button description Turns the power on or off. Selects the highlighted menu option or confirms an input Accesses the main menus, or saves your input and exits the menus. Changes the input source Adjusts the volume level. -
Page 14: Lifting And Moving The Tv
ASSEMBLING AND PREPARING Lifting and moving the Tv y When transporting a large TV, there should be at least 2 people. y When transporting the TV by hand, hold the Please note the following advice to prevent the TV from TV as shown in the following illustration. -
Page 15: Setting Up The Tv
ASSEMBLING AND PREPARING Setting up the Tv Image shown may differ from your TV. Attaching the stand Only 50PN45**, 50/60PN65** 3 EA M5 x 16 Only 42PN45** 3 EA M4 x 14 Stand Body Front Only 50PN45**, 50/60PN65** 4 EA M5 x 16 Only 42PN45** 4 EA... - Page 16 ASSEMBLING AND PREPARING To detach the stand (Only 50PN45**, 50PN65**) CAUTION y When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. y Make sure that the screws are inserted correctly and fastened securely.
-
Page 17: Mounting On A Table
ASSEMBLING AND PREPARING Mounting on a table Adjusting the angle of the Tv to suit view Lift and tilt the TV into its upright position on a table. (This feature is not available for all models.) - Leave a 10 cm (minimum) space from the wall Adjusting the angle of the TV to suit view for proper ventilation. -
Page 18: Mounting On A Wall
When you attach the TV to other building materials, please contact qualified personnel. LG recommends that wall mounting be performed by a CAUTION qualified professional installer. y Make sure that children do not climb on or hang on the TV. -
Page 19: Tidying Cables
If you install the TV on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorised LG wall mount and contact the local dealer or qualified personnel. y Do not over tighten the screws as this may cause Cable holder damage to the TV and void your warranty. -
Page 20: Making Connections
MAKING CONNECTIONS MAKING CONNECTIONS Antenna Connection This section on MAKING CONNECTIONS mainly uses Connect the TV to a wall antenna socket with an RF diagrams for the PN45** models. cable (75 Ω). Connect various external devices to the TV and switch input modes to select an external device. -
Page 21: Hdmi Connection
MAKING CONNECTIONS HdMI Connection dvI to HdMI connection Transmits the digital video and audio signals from an Transmits the digital video signal from an external device external device to the TV. Connect the external device to the TV. Connect the external device and the TV with and the TV with the HDMI cable as shown. -
Page 22: Component Connection
MAKING CONNECTIONS Component Connection Audio Connection Transmits analog video and audio signals from an exter- You may use an optional external audio system instead nal device to the TV. Connect the external device and the of the built-in speaker. TV with a component cable as shown. digital optical audio connection Transmits a digital audio signal from the TV to an exter- nal device. -
Page 23: Composite Connection
MAKING CONNECTIONS Composite Connection Transmits analog video and audio signals from an exter- nal device to the TV. Connect the external device and the TV with th e composite cable as shown. AUDIO IN (PC) AUDIO IN (PC) AV IN 2 L/MONO AV IN 2 L/MONO... -
Page 24: Usb Connection
MAKING CONNECTIONS USB Connection Connect a USB storage device such as a USB flash memory, external hard drive, or a USB memory card reader to the TV and access the My media menu to use various multimedia files. (*Not Provided) -
Page 25: Remote Control
REMOTE CONTROL REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the ends to the label inside the compartment, and close the battery cover. - Page 26 REMOTE CONTROL Only PN65** Navigation buttons (up/down/left/right) POWER Scrolls through menus or options. Turns the TV on or off. AV MODE RATIO INPUT Tv/RAd Selects menus or options and confirms your Selects Radio, TV and DTV programme. input. RATIO (BACK) Resizes an image.
-
Page 27: Using The User Guide
USING THE USER GUIDE USING THE USER GUIdE User Guide allows you to more easily access the detailed TV information. Press SETTINGS to access the main menus. User Guide OPTION > To set language Press the RED button to access the Customer Support menus. -
Page 28: Maintenance
MAINTENANCE / TROUBLESHOOTING MAINTENANCE Cleaning your Tv Clean your TV regularly to keep the best performance and to extend the product lifespan. CAUTION y Make sure to turn the power off and disconnect the power cord and all other cables first. y When the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges. -
Page 29: Environmental Information
ENVIRONMENTAL INFORMATION ENvIRONMENTAL INFORMATION (India only) WEEE disposal of your old appliance 1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the e-waste (Management and Handling) Rules, 2011. 2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. -
Page 30: Specifications
SPECIFICATIONS SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions. For the power supply and power consumption, refer to the label attached to the product. 42PN45** 50PN45** MOdELS 42PN4500-TA 50PN4500-TA With stand (mm) 983.6 x 650.3 x 250.0 1168.0 x 755.4 x 292.7 Dimensions (W x H x D) - Page 31 SPECIFICATIONS Digital TV Analogue TV New Zealand, Television System DVB-T PAL/SECAM-B/G/D/K, PAL-I Singapore BG : VHF/UHF 1 to 69, CATV 01 to 47 Programme UHF 21 to 69 I : VHF/UHF 1 to 69, CATV 01 to 47 Coverage DK : VHF/UHF 1 to 69, CATV 01 to 47 Australia Television System DVB-T...
- Page 32 SPECIFICATIONS HdMI/dvI-dTv supported mode Component port connecting information Component ports on the Horizontal Vertical Resolution Frequency (kHz) Frequency (Hz) 720x480 31.469 59.94 31.5 720x576 31.25 Video output ports on DVD player 1280x720 37.5 44.96 59.94 1920x1080 33.72 59.94 33.75 28.125 Signal Component 26.97...
-
Page 33: Licenses
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the product. - Page 36 Record the model number and serial number of (Only DTV) the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service. MODEL SERIAL...
-
Page 37: External Control Device Setup
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com... - Page 38 EXTERNAL CONTROL DEVICE SETUP KEY CODES This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) CH +, PR + R/C Button Q.Menu R/C Button CH -, PR - R/C Button List, - (ATSC Only) R/C Button Volume + R/C Button...
-
Page 39: External Control Device Setup
(TV) LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter which is not made nor provided by LG. It can be purchased from computer stores that carry accessories for IT support professionals. (PC) - Page 40 EXTERNAL CONTROL DEVICE SETUP (TV) (PC) (TV) (PC) RS-232C with RS-232C Cable (Legacy) Phone jack Type RS-232C IN (CONTROL & SERVICE) (PC) You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and (TV) RS-232C IN the TV, which is specified in the manual.
-
Page 41: Communication Parameters
EXTERNAL CONTROL DEVICE SETUP Communication Parameters Baud rate: 9600 bps (UART) Stop bit: 1 bit Data length: 8 bits Communication code: ASCII code Parity : None Use a crossed (reverse) cable. Command reference list (Depending on model) DATA DATA COMMAND1 COMMAND2 (Hexadeci- COMMAND1 COMMAND2 (Hexadeci-... -
Page 42: Transmission / Receiving Protocol
EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV.(j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99. - Page 43 EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) 04. Volume Mute (Command: k e) ► To control Power Off of the set. ► To control volume mute on/off. You can also adjust mute using the MUTE button on remote Transmission[k][a][ ][Set ID][ ][Data][Cr] control.
- Page 44 EXTERNAL CONTROL DEVICE SETUP 08. Color/Colour (Command: k i) 12. Remote control lock mode (Command: k m) ► To lock the front panel controls on the monitor and remote ► To adjust the screen Color(Colour). control. You can also adjust colour in the PICTURE menu. Transmission [k][i][ ][Set ID][ ][Data][Cr] Transmission [k][m][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64...
- Page 45 EXTERNAL CONTROL DEVICE SETUP 15. ISM Method (Command: j p) (Only Plasma TV) 17. Tune Command (Command: m a) ► To control the ISM method. You can also adjust ISM Method * This command may work differently depending on model in OPTION menu.
- Page 46 EXTERNAL CONTROL DEVICE SETUP 2. Tune to the digital terrestrial (ATSC) channel 30-3. * For South Korea, North/Latin America except Set ID = All = 00 Colombia Model Data 00 = Don’t know Physical = 00 ► To tune channel to following physical/major/minor number. Data 01 &...
- Page 47 EXTERNAL CONTROL DEVICE SETUP 18. Channel(Programme) Add/Del(Skip) 21. Input select (Command: x b) (Command: m b) (Main Picture Input) ► To select input source for main picture. ► To skip current channel(programme) for next time. Transmission [x][b][ ][Set ID][ ][Data][Cr] Transmission [m][b][ ][Set ID][ ][Data][Cr] Data Data 00: Del(ATSC,ISDB)/Skip(DVB)
- Page 48 EXTERNAL CONTROL DEVICE SETUP 2 2 . 3 D ( C o m m a n d : x t ) ( o n l y 3 D m o d e l s ) 23 . Extended 3D(Command: x v) (Depending on model) (only 3D models) (Depending on model) ►...