Tidying Cables - LG 42PN45 Series Owner's Manual

A-4
2
1
SETTING UP THE TV
2
2
1 EA
M5 x 16
1
CAUTION
y When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
y Make sure that the screws are inserted
correctly and fastened securely. If they
are not fastened securely enough, the TV
may tilt forward after being installed. Do
not use too much force and over tighten
the screws; otherwise screw may be
damaged and not tighten correctly.
NOTE
y When installing the wall mounting
bracket, use the Protection Cover.
y This will protect the opening from
accumulating dust and dirt.
y Remove the stand before installing the
TV on a wall mount by performing the
stand attachment in reverse.

Tidying cables

1 Install the Power Cord Holder and Power Cord.
It will help prevent the power cable from being
removed by accident.
2 Gather and bind the cables with the Cable
Holder.
(Only 42PN45**)
Protection
cover
Cable holder
(Only 50PN45**, 50/60PN65**)
Cable holder
CAUTION
y Do not move the TV by holding the cable
holder and power cable holder, as the
cable holders may break, and injuries and
damage to the TV may occur.
Power cord holder
(Depending on model)
Power cord holder
(Depending on model)