Setting Up The Tv; Tidying Cables - LG P47 Series Owner's Manual

A-4

SETTING UP THE TV

2
1 EA
M5 x 16
1
CAUTION
y When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
y Make sure that the screws are inserted
correctly and fastened securely. If they are
not fastened securely enough, the TV may
tilt forward after being installed. Do not use
too much force and over tighten the screws;
otherwise screw may be damaged and not
tighten correctly.
NOTE
y When installing the wall mounting bracket,
use the Protection Cover.
y This will protect the opening from
accumulating dust and dirt.
y Remove the stand before installing the TV
on a wall mount by performing the stand
attachment in reverse.
NOTE

Tidying cables

Install the Power Cord Holder and Power Cord.
It will help prevent the power cable from being
removed by accident. Use Cable Holder to
neatly secure and position cables together.
Position the LAN Cable as shown to reduce the
electromagnetic interference wave.
(Only 42PH47**)
Protection
cover
2
Cable holder
(Only 50PH47**, 50/60PH67**, 50/60PH66**)
Cable holder
CAUTION
y Do not move the TV by holding the cable
holder and power cable holder, as the cable
holders may break, and injuries and damage
to the TV may occur.
Power cord holder
(Depending on model)
Power cord holder
(Depending on model)