Lenovo ThinkPad SL410 Hardware Maintenance Manual page 113

Table 34. Removal steps of DC-in cable and base cover (continued)
Cable routing: Route the cable as shown in these figures.
For ThinkPad SL510, L510, and L512:
For ThinkPad SL410, L410, and L412:
Note: Applying labels to the base cover
The new base cover FRU is shipped with a kit containing labels of several kinds. When you replace the
base cover, you need to apply the following labels:
4
Battery word label
6
Homologation label
Following labels need to be peeled off from the old base cover, and need to be put on the new base cover.
1
MAC address label
2
Wireless WAN label
3
Windows license label (COA)
5
Serial number label
7
FCC label
8
SIM ICC ID label
.
Chapter 8 Removing and replacing a FRU
105