1220 Dc-In Cable And Base Cover - Lenovo ThinkPad SL410 Hardware Maintenance Manual

Table 33. Removal steps of USB connector board and USB cable assembly (continued)
Cable routing: Route the USB cable assembly as shown in these figures.
For ThinkPad SL510, L510, and L512:
For ThinkPad SL410, L410, and L412:

1220 DC-in cable and base cover

For access, remove these FRUs in order:
• "1010 Battery pack" on page 59
• "1020 ExpressCard blank bezel and Media Card blank bezel" on page 60
• "1030 Optical drive or travel cover" on page 62
• "1040 Thermal cover" on page 63
• "1050 Hard disk drive (HDD) assembly" on page 64
• "1060 DIMM" on page 65
• "1070 Fan assembly" on page 66
• "1100 Wireless WAN slot cover and PCI Express Mini Card for wireless WAN" on page 73
• "1110 Palm rest assembly with cables" on page 75
• "1120 PCI Express Mini Card for wireless LAN" on page 78
• "1150 Media Card Reader slot board and Media Card Reader cable assembly" on page 81
• "1160 Keyboard" on page 83
• "1170 Keyboard bezel" on page 86
• "1180 LCD unit" on page 87
• "1190 Top shielding assembly" on page 91
• "1200 System board assembly" on page 94
.
Chapter 8 Removing and replacing a FRU
103