Interfaces And Connectors; External Ports; Lan Port - Fujitsu Siemens Computers D1944 Technical Manual

Interfaces and connectors

Interfaces and connectors
The positions of the interfaces and connectors are shown on page "Cover".
The components and connectors marked are not necessarily present on the mainboard.

External ports

The positions of the external ports are shown on page "Cover".
PS/2 keyboard port, purple
Serial interface, turquoise
LAN

LAN port

Audio output (Line out), light green
Audio input (Line in), light blue
LAN port
This mainboard has a Broadcom BCM5751 LAN controller. This LAN controller supports the transfer
rates 10 Mbit/s, 100 Mbit/s and 1000 Mbit/s. The LAN controller supports the WOL functionality
through Magic Packet
It is also possible to boot a device without its own boot hard disk via LAN. Here bootix® BootP and
Intel PXE are supported.
The LAN RJ45 connector has two LEDs (light emitting diodes).
LED 1 lights green - a connection exists (e.g. to a hub). LED is blinking green: activity
LED 2 lights up differently depending on the transfer rate:
10 Mbit/s off
100 Mbit/s green
1000 Mbit/s yellow
6 - English
TM
. The ASF 2.0 format (Alert Standard Format) is supported.
1
PS/2 mouse port, green
Parallel port/Printer, burgundy
USB - Universal Serial Bus, black
Microphone jack (mono), pink
2
A26361-D1944-Z120-1-7419, edition 1