Topfield TF3200IR User Manual page 39

Digital satellite receiver with irdeto embedded

Table of Contents

MENU OPERATIONS

If you have USALS motorized system, then you can use the USALS as followings.

. Satellite Name: Select a satellite that will be used to identify a motor system.

. Satellite Angle: It is the Longitude of the selected satellite and it can be set automatically

in case of selecting a satellite name.

. My Longitude : It means the angle of Longitude and you can select the direction of EAST

and WEST by Numeric or

. My Latitude : It means the angle of Latitude and you can select the direction of SOUTH

and NORTH by Numeric or

. Reference Position : Goes to Reference position (O˚)

. Move : After selecting "goto the position" menu, it is adjustable by fine-tuning and

button moves to anti-clockwise and clok-wise respectively.

VOL

. Frequency : Selects the frequency to catch the strong signal.

. Goto the position : After setting the Longitude, Latitude and the longitude of the selected

satellite, this menu is used when you want to move the desired direction (position)of the

dish, saved before. Its moving limit is ±65˚.

IV-5. Factory Setting

All the stored data can be reset just like it was manufactured.

button.

VOL

button.

VOL

Table of Contents

Show Quick Links

Table of Contents