Getting Started - Topfield TF3200IR User Manual

GETTING STARTED

Press the Power
Now, the Info box will appear for a given time and disappear. Pressing the
the Info box will remain on the screen. The display time of the Info box is adjustable
under the System Setting Menu of the Main Menu.
If the current broadcast has EPG (Electronic Program Guide) with it, press the
to see not only the current channel's but also other channel's EPG without any time constraints.
Also, press the button to reserve and save the current service and to watch the broadcast
automatically when it starts.
IMPORTANT: Before taking charge of your new STB, some important technical
settings are essential.
- Adjust your antenna through Dish Setting menu in installation menu.
- First, press the
- Go to the LNB Setting menu under the Channel Search item of the
Installation menu and press
- The Default PIN CODE is 0000.
- Choose the right parameters for Satellite Name, LNB Frequency, 22KHz, 12 V,
DiSEqC 1.0, and Motorized System according to your LNB and satellite settings.
If the right Satellite Name and LNB Frequency were not found in the list, call the
dealer for satellite information.
- Then, press the
- Set the Search Mode to the Auto mode. (A Manual or Advanced Search
can always be performed later on)
- Select the Start Search... item and press
- The search procedure will take a while. Press the
process is over (100%) to confirm and save the new channel list.
- For further information, please refer to the LNB Setting item of the MENU
OPERATIONS on this manual.
button to operate the STB from the STANDBY mode.
button on the RCU to make the Main Menu appear.
button.
button and go back to the Channel Search menu.
button,
button.
button when the searching
button