Topfield TF3200IR User Manual page 38

MENU OPERATIONS
. Motor Control
- Goto : Moves the motor to the stored position of the selected satellite.
- Store : Stores the current position of the motor for the selected satellite.
- Reset : Resets all stored position of the motor relative to the "0" position.
(Installer mode only)
- Recalculate : Recalculates the position of the Stab Rotor motor.
- Limit E,W: Limits east and west position.
- Limit OFF : Setting of the limitation.
- Goto Ref : Goes to reference.
. Channel Search: After saving the DiSEqC configuration at the highest signal quality,
press button to start channel searching of the selected satellite.
IV-4. USALS Setting
USALS is very convenient motorized DiSEqC System that support DiSEqC 1.3 command
and also can get the satellite position automatically if you know geographical location.
Basically,the listed satellites have the Longitude saved and therefore the angle of the satellite
can be calculated without problem.