Topfield TF3200IR User Manual page 37

MENU OPERATIONS
IV-3 . Motorized DiSEqC 1.2
If you have DiSEqC 1.2 motorised system, then you can use the DiSEqC 1.2 functions. If you have DiSEqC 1.2 motorised system, then you can use the DiSEqC 1.2 functions.
. Satellite Name . Satellite Name
A selection of satellite names that will be used to identify a motor position. A selection of satellite names that will be used to identify a motor position.
. Frequency: Selects the frequency to catch the strong signal. . Frequency: Selects the frequency to catch the strong signal.
. DiSEqC Command Mode : Change the current mode between User and Installer . DiSEqC Command Mode : Change the current mode between User and Installer
modes. modes.
- User: This mode is used to fine-tune the position of the motor for better reception. - User: This mode is used to fine-tune the position of the motor for better reception.
- Installer: This mode is used to search for the position of a satellite manually. - Installer: This mode is used to search for the position of a satellite manually.
. Movement: In case of User mode, the movement is adjustable by fine-tuning. . Movement: In case of User mode, the movement is adjustable by fine-tuning.
In case of Installer mode, the movement is adjustable by East ,West going In case of Installer mode, the movement is adjustable by East ,West going
command. command.