Denon AVR-E300 Owner's Manual page 19

Connecting an iPod or USB memory device to the USB port
• You can enjoy music stored on an iPod or USB memory device.
• For operating instructions see "Playing an iPod"
(vpage 32).
Cables used for connections
To connect an iPod to this unit, use the USB adapter cable that was supplied with the iPod.
iPod
USB memory
device
or
Denon does not guarantee that all USB memory devices will operate or receive power. When using a
portable USB hard disk drive (HDD) which came with an AC adapter, use that device's supplied AC adapter.
NOTE
• USB memory devices will not work via a USB hub.
• It is not possible to use this unit by connecting the unit's USB port to a PC via a USB cable.
• Do not use an extension cable when connecting a USB memory device. This may cause radio interference
with other devices.
• When connecting an iPhone to this unit, keep the iPhone at least 20 cm (8 inches) away from this unit.
If the iPhone is positioned close to this unit and a telephone call is received, noise may be output from
this unit.
• If the iPod is connected using an iPod cable (commercially available) that is longer than 2 meters (6 feet)
sound may not be played correctly. In this case, use a genuine iPod cable, or a cable that is shorter than
1 meter (3 feet).
DVD
(vpage 29) or "Playing a USB memory device"
Supported iPod models
• iPod classic
• iPod nano
• iPod touch
• iPhone
16
Connecting other devices