Interfaces And Connectors - Fujitsu Siemens Computers D2470 Short Description

Short description of the mainboard
Information about the boards
Please make sure that you observe the following for boards with ESD:
• Always discharge any build up of static electricity (e.g. by touching a grounded
object) before working on the boards.
• The equipment and tools you use must be free of static charge.
• Disconnect the power plug from the mains supply before inserting or removing
boards.
• Always hold boards by their edges only.
• Never touch pins or conductor tracks on boards.
An overview of features is provided in the data sheet.
Special features
Your mainboard is available in different configuration levels. Depending on the configuration,
your mainboard is equipped with or supports certain features.
This manual describes the most important features of this mainboard.

Interfaces and connectors

The location of the interfaces and connectors of your mainboard is specified
at the beginning of the manual.
The marked components and connectors are not necessarily present on the mainboard.
External connections
The location of the external connections of your mainboard is specified at the beginning of the manual.
LAN port (RJ-45)
DVI port
Rear centre / LFE, orange
Rear surround - side, grey
Rear surround, black
A maximum current of 0.5 A may be connected to the external
USB connections on the rear.
edition 1
Short description of the mainboard
Microphone jack, pink
USB – Universal Serial Bus, black
Digital 6-channel audio output, orange
FireWire , grey
TM
8