Topfield TF6500F User Manual page 20

Digital satellite receiver free to air

Hide thumbs Also See for TF6500F:

Table of Contents

Motorized DiSEqC 1.3

Satellite Name

Satellite Angle

My Longitude

My Latitude

Reference Position

Move

Set this parameter to enable if you have DiSEqC 1.3 switch.

Select a satellite that will be used to identify a motor position.

This parameter represents the longitude of the selected satel-

lite and it can be set automatically in case of selecting a satellite

name. You can use the numeric buttons enter the angle. East

or West will be selected by

This parameter represents the longitude of your location. You

can select the angle, East and West by

tons.

This parameter represents the latitude of your location. You

can select the angle, South or North by

tons.

This menu makes go to the reference position (φ°).

After searching the position you want by Goto the position

item, you can tune the antenna to go to the exact position

by this item.

clockwise and clockwise respectively.

and

button moves the antenna to anti-

Installation

buttons.

or numeric but-

Table of Contents