Topfield TF6500F User Manual page 17

2.6 Station Settings
Frequency
Symbol Rate
Polarization
Network Search
PID
FTA/Scrambled
quency, symbol rate and polarization type of the transponder
you want to search. To use the Advanced mode, you have to
know the audio PID, video PID or PCR PID of the transpon-
der you want to search. The SMATV mode is used for special
purposes on the satellite master antenna TV system.
In manual, advanced or SMATV search mode, select or enter
the frequency of the transponder you want to search.
In manual, advanced or SMATV search mode, select or enter
the symbol rate of the transponder you want to search.
In manual or advanced search mode. select the polarization
type of the transponder you want to search.
In automatic or manual search mode, if NIT(Network Infor-
mation Table) is available and this parameter is set to on, the
information of the transponder you want to search will be
found.
PID(Packet Identifier) is a set of numbers that identifies the
transport streams packets from a single data stream. In ad-
vanced search mode, enter and save the PIDs of the transpon-
der you want to search.
Select the station class you want to search. FTA(Free To Air) is
free, but CAS(Conditional Access System) is not.
13