Genie CCTV SDDVR Installation & User Manual page 22

2. SEARCH MODE
2.1 SEARCH LIST
2007 / 01 / 01
2007 / 01 / 31
2.2 SEARCH FACTOR:
There are four ways to search recorded files; TIME, EVENT, BOTH (TIME & EVENT), NONE
2.2.1 SEARCH FACTOR – EVENT:
When you select 'EVENT (or BOTH) on SEARCH MODE', subordinate search conditions open; ALARM /
MOTION / EMERGENCY / TIME (Here, the time means "scheduled time recording" using scheduling feature)
More than two conditions can be selected. In this case, each condition is connected with 'OR' condition.
2.2.2 SEARCH FACTOR – TIME:
TIME
0 0 : 0 0
2 3 : 5 9
LIST
When pressing
LOGIN window appears.
To Enter 'Search Mode', enter 4-digit password.
After pressing
remote control, click 'LIST'. The search results
will be listed.
* ALARM: To search recorded files triggered by
alarm-in event.
* MOTION: To search recorded files triggered by
motion
* EMERGENCY: To search recorded files generated
by emergency recording (full recording)
* TIME (scheduled time): To search recorded files
generated by time schedule
To search recorded all files within the specific
period of time.
Enter the time period you wish to search for.
22
'SEARCH' button,
'SEARCH' button on