System Specifications - JBL PRX515 User Manual

SYSTEM SPECIFICATIONS

PRX512M
System Type:
Frequency Range (-10 dB):
Frequency Response (±3 dB):
Coverage Pattern:
Directivity Index (DI):
Directivity Factor (Q):
Crossover Modes:
Crossover Frequency:
System Power Rating:
LF Power amp:
HF Power amp:
Distortion:
Maximum Peak Output:
Signal indicators:
Input sensitivity:
Input Impedance:
EQ:
LF Driver:
HF Driver:
Enclosure:
Suspension / Mounting:
Transport:
Finish:
Grille:
Input Connectors:
Dimensions (H x W x D):
Net Weight:
1
Maximum Peak output measured with IEC pink noise at 1 meter in front of speaker baffle under free space conditions. Measurement instrument
set to peak hold. Speaker muted and released at full power, recording maximum peak level.
10
Self powered 12", two-way, bass-reflex,
46Hz -20kHz (EQ in main position)
60Hz - 20kHz (EQ in monitor position)
76Hz -20kHz (EQ in main position)
90Hz - 20kHz (EQ in monitor position)
70º x 70º nominal
10.2 dB
10.8
DSP controlled 48dB filter slope
1.6KHz
500 W continuous, 1000W peak
Class-D, 400 Watt (continuous) at driver impedance
Class-D, 100 Watt (continuous) at driver impedance
Less than 0.1% at rated power
1
133dB SPL
Overload: Red LED indicates input overload condition
Signal: Green LED indicates signal present
Mic position: -25 dBu to 0 dBu
Line position: +28 dBu to +10 dBu
64 K Ohms (balanced), 32 K Ohms (unbalanced)
Presets for use in Main and Monitor position
1 x JBL 262F 380 mm (12 in) Differential Drive
1 x JBL 2408H 37.5 mm (1.5 in) annular polymer diaphragm,
neodymium compression driver
Trapezoidal, 18 mm, plywood
Dual 36mm pole socket
Integrated handle with backing cup
Anthracite DuraFlex™ finish
Powder coated, Anthracite, 18 gauge perforated steel
with acoustical transparent black foam backing.
Balanced XLR / 1/4 inch combo jack with XLR loop through,
650 mm x 380 mm x 350 mm
(25.5 in x 15 in x 14 in)
18 kg (40 lb.)
®
woofer