JBL PRX515 User Manual page 11

PRX515
System Type:
Frequency Range (-10 dB):
Frequency Response (±3 dB):
Coverage Pattern:
Directivity Index (DI):
Directivity Factor (Q):
Crossover Modes:
Crossover Frequency:
System Power Rating:
LF Power amp:
HF Power amp:
Distortion:
Maximum Peak Output:
Signal indicators:
Input sensitivity:
Input Impedance:
EQ:
LF Driver:
HF Driver:
Enclosure:
Suspension / Mounting:
Transport:
Finish:
Grille:
Input Connectors:
Dimensions (H x W x D):
Net Weight:
1
Maximum Peak output measured with IEC pink noise at 1 meter in front of speaker baffle under free space conditions. Measurement instrument
set to peak hold. Speaker muted and released at full power, recording maximum peak level.
Self powered 15", two-way, bass-reflex,
45Hz -20kHz (EQ in flat position)
52Hz - 20kHz (EQ in flat position)
70º x 70º nominal
10.3 dB
10.8
DSP controlled 48dB filter slope
1.6KHz
500 W continuous, 1000W peak
Class-D, 400 Watt (continuous) at driver impedance
Class-D, 100 Watt (continuous) at driver impedance
Less than 0.1% at rated power
1
133dB SPL
Overload: Red LED indicates input overload condition
Signal: Green LED indicates signal presents
Mic position: -25 dBu to 0 dBu
Line position: +28 dBu to +10 dBu
64 K Ohms (balanced), 32 K Ohms (unbalanced)
Presets for Main and Monitor position
1 x JBL 265F 380 mm (15 in) Differential Drive
1 x JBL 2408H 37.5 mm (1.5 in) annular polymer diaphragm,
neodymium compression driver
Trapezoidal, 18 mm, plywood with polypropylene end caps
Dual 36mm pole socket
2 x die-cast handles with backing cup
Anthracite DuraFlex™ finish
Powder coated, Anthracite, 18 gauge perforated steel
with acoustical transparent black foam backing.
Balanced XLR / 1/4 inch combo jack with XLR loop through,
815 mm x 440 mm x 465 mm
(32 in x 17.25 in x 18.25 in)
26 kg (57 lb.)
®
woofer
11