Bridged Mode; (Use As High-Power Mono Amplifier); Way Binding Post - Yamaha XP7000 Owner's Manual

■
Bridged Mode (use as high-power mono amplifier)
Set the Mode switch to BRIDGE to use the unit as a high-power mono amplifier. The volume control A on the front panel A
lets you control the volume.
Note: In this case, the loads for A and B are directly connected in the amplifier. Make sure not to input any signal
to the B terminal.
● 5-way binding post ● Speakon connector
+
–
Minimum speaker Minimum speaker
impedance: 8Ω impedance: 8Ω
9
XP7000/XP5000/XP3500/XP2500/XP1000 Owner's Manual