Removing The Doors - GE 21 Owner's Manual And Installation Instructions

REMOVING THE DOORS

IMPORTANT NOTES
NOTE: Door swing is not reversible.
• Read the instructions all the way through before
starting.
• Handle parts carefully to avoid scratching paint.
• Set screws down by their related parts to avoid
using them in the wrong places.
• Provide a non-scratching work surface for the
doors.
IMPORTANT: Once you begin, do not move the
cabinet.
These instructions are for removing the doors.
Unplug the refrigerator from its electrical outlet.
Empty all door shelves, including the dairy
compartment.
TOOLS YOU WILL NEED
Ofrecido por www.electromanuales.com
Installation Instructions
(Double Door Refrigerator Models only)
"
REMOVE THE REFRIGERATOR DOORS
1
Tape the doors shut with masking tape.
A
Start with right-hand door first: Remove the
B
screw securing the center hinge cover, lift the
hinge cover and place to the side on top of the
refrigerator.
Remove water coupling and power coupling.
C
C1
Water Coupling
Remove the metal spring
clip. Use a screwdriver to
push the red plastic locking
clip down and off.
C2
Water Coupling
Push red collar
and hold.
Pull tube.
C3
Power Coupling
Black mark
flush with
collar assembly
30
Pull apart power
coupling to
disconnect