GE 21 Owner's Manual And Installation Instructions page 16

Ofrecido por www.electromanuales.com
Trim kits and decorator panels.
3/4 " (19 mm) or Raised Panel
A raised panel design screwed or glued to a 1/4" (6 mm) thick backing, or a 3/4" (19 mm) routed board can be used. The raised
portion of the panel must be fabricated to permit clearances of at least 2" (5.1 cm) from the handle side for fingertip clearance.
Panels thicker than 1/4" (6 mm), up to 3/4" (19 mm) max., will require that the outer 5/16" (8 mm) of panel perimeter be no
thicker than 1/4" (6 mm).
Weight limitations for custom panels:
Fresh Food 10 lbs. (4.5 kg) max. for each door
Freezer Door 18 lbs. (8 kg) max.
"
"
"
"
Dimensions for Custom Wood Panels
"
Left Fresh Food Door
"
"
"
"
"
16
"
"
"
"
"
"
Freezer Door
"
"
"
"
"
"
Right Fresh Food Door
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"