Maxent ML-3731HLT Owner's Manual page 33

FILE LOCATION: E:\workarea\customer\MAXNET\061101_ML-3731Manual-revisions\ch5e.fm
Problem
No sound
Bright or dark dots
Picture is too dim or too bright
The screen is not centered
correctly
DELL CONFIDENTIAL – PRELIMINARY 12/6/06 – FOR PROOF ONLY
33
Troubleshooting Problems With Your TV
Possible Solution
Ensure mute is not turned on. Pressing the Mute button on the
1
remote control turns the mute function on and off.
Verify that the audio cables are firmly connected to both the
2
audio input connectors on your TV display and audio output
connectors on your devices. Ensure that the cable colors
match the connectors colors.
Also, ensure that the audio cables are connected to the same
3
row as the video cables. See "About Your TV" on page 5 for
the location of the connectors.
Reconnect the device using the same type of connector. For
4
example, if you are using the composite connector on the
bottom, try connecting the device to the composite connector
on the side of the TV display. See "About Your TV" on page 5
for the location of the connectors.After you connect the
device, change the input source in the TV Menu. See "Input
Select" on page 26 for more information.
Connect the device using a different connector. For example,
5
if you are experiencing the problem using a composite
connector, try using the component connector.
NOTE:
To connect to a different connector, you need the
appropriate cables for that connector. See your device
documentation for a list of supported connections.
After you connect the device, change the input source in the
TV Menu. See "Input Select" on page 26 for more
information.
Test the device on a different TV.
6
Pixel defects within industry specifications are inherent to an
LCD TV and do not constitute a defective problem. Please
refer to the warranty information.
Update the color settings in the OSD Menu. Press Menu on the
remote control and select Picture Settings.
Update the size settings in the OSD Menu. Press Menu on the
1
remote control and select Size.
Reset the original factory defaults. Press Menu on the remote
2
control, select Setup, and then select Factory Reset.