Maxent ML-3731HLT Owner's Manual page 15

FILE LOCATION: E:\workarea\customer\MAXNET\061101_ML-3731Manual-revisions\ch2e.fm
Using the Antenna Connector (Coaxial)
Turn off the TV and unplug the power cord.
1
Connect the coaxial cable to the ANT
2
connector on the TV.
Plug in the power cord for the TV and turn on
3
the TV.
Enter the TV Menu and select TV for NTSC and Digital TV tuning. See "Input Select" on
4
page 26 for more information.
Using the Composite Connector
Turn off the TV and unplug the power cord.
1
NOTE:
If you are connecting a device that you want to be able to remove,
such as a video game system or a camcorder, use the composite
connector on the right side of the TV (see "Left View" on page 7).
Connect your device to the TV using the composite audio and video
2
cable.
Plug in the power cords for the TV and devices and turn them on.
3
Enter the TV Menu and select AV1, or AV SIDE (Composite 3). See
4
"Input Select" on page 26 for more information.
Using the S-Video Connector
Turn off the TV and unplug the power cord.
1
NOTE:
If you are connecting a device that you want to be able to remove,
such as a video game system, or a camera, use the S-Video
connector on the right side of the TV (see "Left View" on page 7).
Connect your device using the S-Video and audio cables.
2
Plug in the power cords for the TV and devices and turn them on.
3
Enter the TV Menu and select AV3, AV2, or AV SIDE (S-Video 2).
4
See "Input Select" on page 26 for more information.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 2 / 7 / 0 6 – F O R P R O O F O N L Y
15
Setting Up Your TV