Specifications - zapco ZX-series Owner's Manual

Rated power output
-RMS power, 4 ohms stereo --------------------------------------------
-RMS power, 2 ohms stereo --------------------------------------------
-RMS power, 1 ohm stereo ---------------------------------------------
-RMS power, 4 ohms bridged ------------------------------------------
-RMS power, 2 ohms bridged ------------------------------------------
Signal to Noise Ratio -------------------------------------------------------
Low Pass Crossover --------------------------------------------------------
High Pass Crossover -------------------------------------------------------
Bass boost @ 45Hz --------------------------------------------------------
Frequency Response -------------------------------------------------------
THD@RMS Watts -----------------------------------------------------------
Channel Separation --------------------------------------------------------
Fuse Ratin ------------------------------------------------------------------
Input Sensitivity -----------------------------------------------------------
Dimensions (mm) ----------------------------------------------------------
Rated power output
-RMS power, 4 ohms stereo --------------------------------------------
-RMS power, 2 ohms stereo --------------------------------------------
-RMS power, 1 ohm stereo ---------------------------------------------
-RMS power, 4 ohms bridged ------------------------------------------
-RMS power, 2 ohms bridged ------------------------------------------
Signal to Noise Ratio -------------------------------------------------------
Low Pass Crossover --------------------------------------------------------
High Pass Crossover -------------------------------------------------------
Bass boost @ 45Hz --------------------------------------------------------
Frequency Response -------------------------------------------------------
THD@RMS Watts -----------------------------------------------------------
Channel Separation --------------------------------------------------------
Fuse Rating -----------------------------------------------------------------
Input Sensitivity -----------------------------------------------------------
Dimensions (mm) ----------------------------------------------------------
The above specifications shall be modified by manufacturer for improvement without prior notice.

SPECIFICATIONS

-7-
ZX-500.2
510W x 2CH
840W x 2CH
1210W x 2CH
1730W x 1CH
2440W x 1CH
>90dB
30Hz ~ 250Hz
50Hz ~ 500Hz
0~12dB
10Hz ~ 30KHz (+/-1dB)
0.1%
60dB
250A(external type fuse)
200mV~6V (+/- 5%)
190(W) x 60(H) x 660(L)
ZX-200.4
210W x 4CH
330W x 4CH
490W x 4CH
680W x 2CH
1000W x 2CH
>90dB
30Hz ~ 250Hz
50Hz ~ 500Hz
0~12dB
10Hz ~ 30KHz (+/-1dB)
0.1%
60dB
200A(external type fuse)
200mV~8V (+/- 5%)
190(W) x 60(H) x 650(L)