Wan Ip Address - ActionTec GT701-WG User Manual

Actiontec 54 Mbps Wireless DSL Gateway User Manual
4. In the next screen, read the recommendations. To perform an advanced setup
on the Gateway, click Begin Advanced Setup.
5. The "Configuring the Advanced Settings" screen appears. To check all the set-
tings, or if unsure of which settings to modify, select Next. To modify a spe-
cific configuration, click on its name in the menu bar on the left.
☞
Note: To save changes made in any of the Advanced Setup
screens, click Save and Restart at the bottom of the gray menu
on the left side of the screen.

WAN IP Address

Selecting Address in the "Configuring the Advanced Settings" screen gen-
WAN IP
erates the "
WAN IP
IP address of the Gateway. There are five ways to do this: Transparent Bridging,
Obtain an Address through
IP
Obtain an IP Address through
☞
Note: If unsure about which connection is present, check with
the Internet Service Provider (
Address" screen.
WAN IP
o
PPP E
DHCP
Address allows manual set up of the
, Obtain an Address Through
IP
, and Specify a Static
before continuing.
ISP)
36
,
PPPoA
Address.
IP