Appendix D: Telephone Operation - TP-Link TD-VG3631 User Giude

TD-VG3631

Appendix D: Telephone Operation

The table below guides you to configure some frequently used call features using keypads on your
telephone. For the features mentioned in this table, please refer to Telephony Features in
Appendix C.
Code Description
Listen to
messages
*20
your USB
device.
*60 Disable Call Waiting.
*61 Enable Call Waiting.
With Call
enabled, disable it for
*62
the call you are going
to make.
With Call
disabled, enable it for
*63
the call you are going
to make.
*99 Enable Redial on busy.
Disable all
*70
forwarding features.
Enable Call Forwarding
*71
on No Answer.
300Mbps Wireless N VoIP ADSL2+ Modem Router User Guide
Pick up the phone to dial this code and then follow the voice
prompts for the operations below:
Press 0 to listen to new messages.
voice
stored in
Press 1 to listen to the previous message.
storage
Press 2 to listen to the current message again.
Press 3 to listen to the next message.
Press 4 to delete the current message.
Pick up the phone to dial this code. After hearing the
confirmation tone, hang up to make the configuration take
effect.
Pick up the phone to dial this code. After hearing the
confirmation tone, hang up to make the configuration take
effect.
Waiting Pick up the phone to dial this code. You will hear the
confirmation tone and then the dial tone which will prompt
you to dial the destination number.
Waiting Pick up the phone to dial this code. You will hear the
confirmation tone and then the dial tone which will prompt
you to dial the destination number.
Pick up the phone to dial this code. You will hear the
confirmation tone and then the dial tone which will prompt
you to dial the destination number. If the called party is busy,
the number will be dialed again and again until there is
response. To end the dialing, hang up and then pick up your
phone.
Pick up the phone to dial this code. After hearing the
the call
confirmation tone, hang up to make the configuration take
effect.
Pick up the phone to dial this code. After hearing the
confirmation tone, hang up to make the configuration take
Usage
117