Table of Contents
Advertisement
Enable: if selected, enables ISDN access functionality.
Number: enter the number associated with ISDN access.
Spid: specify the SPID if existing.
TEI Fixed: select TEI Fixed according the functional characteristics of the
network. The TEI constitutes an identifying number that allows the ISDN
exchange to distinguish between different terminals connected to a common
access point. If TEI Fixed is selected, then you must manually enter the TEI
number. Conversely by not selecting, the parameter will be set as TEI Automatic.
In this case, the TEI number will be automatically assigned by the exchange and
no further operations are necessary.
Spid2: enable any eventual SPID2 and enter the appropriate numbers.
IP Configuration
From the Network Interface menu select IP and press OK.
The three options available are:
•
IP Configuration
•
H.323 settings
•
Services
Select "IP CONFIGURATION".
!
In order to configure these addresses, contact the network
administrator.
40
Advertisement
Table of Contents
