Akai MPC4000 User Manual page 68

Chapter 7—Effects
2. If you want to select an effect type, move the cursor to the Effect field of effects 1–4, and turn
the [JOG] dial.
The Select Effect Type popup window will appear. In this popup window you can select the effect type.
2
3. Turn the [JOG] dial to select the effect type.
The MPC4000 provides the following effect types. For the effect produced by each type and details of the
parameters, refer to the reference manual.
4. After you have selected an effect type, press the [F6] key (SELECT).
The selected effect type will be finalized, and the window will close.
5. Press the [F3] key (MIX).
The Mix page will appear. In this page you can adjust the level of the signal that is output from each effect,
and specify whether the direct sound will be output from the effect.
60
1
3
Effect types
CHORUS>MONO
CHORUS>STEREO
CHORUS>XOVER
CHORUS+DELAY
COMPRESSOR/LIMITER
DELAY>MONO
DELAY>MULTI TAP
DELAY>PAN
DELAY>PING PONG
DELAY>STEREO
DELAY>XOVER
DIGITAL EQ
DISTORTION
ENHANCER
EXPANDER
FLANGER>MONO
FLANGER>PAN
FLANGER>STEREO
FLANGER>EXPANDER
FLANGER+DELAY
NOISE GATE
PAN>AUTO PAN
PAN>TRIGGER PAN
PHASER>MONO
PHASER>PAN
PHASER>STEREO
A
Effect list: Selects the effect type that will be
used.
B
[F1] key (CLOSE): Cancels the operation and
closes the window.
C
[F3] [F6] key (SELECT): Finalizes the effect
1
type you selected in .
Effect types
PHASER>XOVER
PHASER+DELAY
PITCH CORRECTOR
PITCH SHIFTER
REVERB>AUDITORIUM
REVERB>BIG HALL
REVERB>BIG ROOM
REVERB>BRIGHT HALL
REVERB>BRIGHT PLATE
REVERB>DRUM BOOTH
REVERB>LIVE HOUSE
REVERB>MEDIUM HALL
REVERB>MEDIUM ROOM
REVERB>NON LINEAR
REVERB>PLATE
REVERB>REVERSE
REVERB>SMALL HALL
REVERB>SMALL ROOM
REVERB>STUDIO
REVERB>THEATER
REVERB>VOCAL PLATE
REVERB>WAREHOUSE
ROTARY SPEAKER
TAPE ECHO
WAH>AUTO WAH
WAH>TOUCH WAH