American DJ Accu Spot 575 User Instructions page 13

Accu Spot 575
DISP MAIN MENU -
VALU
Display the DMX-512 value of each channel -
1. Access the main menu.
2. Tap the UP button until "DISP" is displayed, press ENTER.
3. Tap the UP button until "VALU" is displayed, press ENTER.
4. The display should show "D-00". Press the UP button in
order to select the desired channel. If you select "D-05" the
display will only show the DMX value of the 5th channel
5. Press ENTER to confirm.
6. Press MODE/ESC to return to the main menu.
Now the display will change as per the 5th channel DMX
value.
D ON
Turns the digital display on and off -
1. Access the main menu.
2. Tap the UP button until "DISP" is displayed, press ENTER.
3. Tap the UP button until "D ON" is displayed, press ENTER.
4. Press the UP or DOWN buttons to select either "ON" to acti-
vate this function, or "OFF" to deactivate this function.
5. Press ENTER to confirm.
6. Press MODE/ESC to return to the main menu.
FLIP -
This function will reverse the display 180º.
1. Access the main menu.
2. Tap the UP button until "DISP" is displayed.
3. Tap the UP button until "FLIP" is displayed, press ENTER.
American DJ - www.americandj.com - Accu Spot 575 Instruction Manual Page 25
®
System Menu Accu Spot 575
4. Press the UP or DOWN buttons to select either "ON" to acti-
vate this function, or "OFF" to deactivate this function.
5. Press ENTER to confirm.
6. Press MODE/ESC to return to the main menu.
SPEC MAIN MENU -
LAAU
when power is applied.
1. Access the main menu.
2. Tap the UP button until "SPEC" is displayed, press ENTER.
3. Tap the UP button until "LAAU" is displayed, press ENTER.
4. Press the UP or DOWN buttons to select either "ON" to acti-
vate this function, or "OFF" to deactivate this function.
5. Press ENTER to confirm.
6. Press MODE/ESC to return to the main menu.
RDMX
address via any DMX controller. This function is factory set
to "ON" already.
1. Access the main menu by pressing MODE/ESC.
2. Tap the UP button until "SPEC" is displayed, press ENTER.
3. Tap the UP button until "RDNX" is displayed, press ENTER.
4. Press the UP button to select "ON" to activate this function,
or "OFF" to deactivate.
5. Press ENTER to confirm, and "PASS" will flash quickly.
6. Press MODE/ESC to return to the main menu.
To use this function follow the instructions:
To adjust the address of your unit you must first go to the
address that it is currently set to. From there you can adjust the
American DJ
- With this function the lamp will automatically light
With this function you are able to change the DMX
- www.americandj.com - Accu Spot 575 Instruction Manual Page 26
®
System Menu