Section 4: Operations; Operation Safety; Basic Controls - Grizzly G0657/G0658 Owner's Manual

SECTION 4: OPERATIONS

Operation Safety

Damage to your eyes, lungs, and ears could
result from using this machine without
proper protective gear. Always wear a face
shield, respirator, and hearing protection
when operating this machine.
Loose hair and cloth-
ing could get caught in
machinery and cause seri-
ous personal injury. Keep
loose clothing and long
hair away from moving
machinery.
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLY REC-
OMMEND that you read books, trade maga-
zines, or get formal training before begin-
ning any projects. Regardless of the con-
tent in this section, Grizzly Industrial will
not be held liable for accidents caused by
lack of training.
G0657/G0658 Benchtop Lathe

Basic Controls

Use the descriptions and figures below to become
familiar with the basic controls of your lathe.
Lathe ON/OFF Switch: Turns power ON/OFF to
the lathe motor, which rotates the spindle.
Speed Adjust Knob: Adjusts the speed of the
spindle within the current belt position speed
range.
RPM Display: Displays the spindle speed in revo-
lutions per minute (RPM).
Speed Display
Speed Adjust Knob
Figure 13. Control Panel.
ON/OFF Switch
-17-