On Screen Menu; Language Selection - Monitor Audio ASB-2 User Manual

Windows pop up:
Mac pop up:
11. After clicking the OK button on the pop up, there
will be no other visible indication on your browser
that the ASB-2 is connected to the network.
The LED will then start to flash blue and green
alternately (Pattern 2) and then change to the
previous input mode once it has been connected.
This will be indicated by the LED.
12. Remember to return to the Available Wireless
Networks list on your computer and reselect your
home Wireless Network.
13. To start streaming to the ASB-2 from your PC,
Mac or iOS device, please refer to page 19.
HINTS
If the LED flashes blue slowly (pattern 1),
then it has failed to connect. You will have
to repeat the above steps to try again.
If it still flashes blue slowly after repeating
the above steps, try moving the ASB-2
closer to the router.

On Screen Menu

To access the OSD, press the Menu button (Item 6,
Remote, page 4). A single press of the Menu button
will bring up the menu, illustrated below:
To navigate through the menu use the up, down, left
and right arrows. Use the up and down arrows to
move up and down the different options and then
the right arrow to select that option. Press ok on the
option you wish to select and then use the left arrow
to move back to the main menu.

Language Selection

Firstly, we would recommend selecting the OSD
Language. To do this, navigate down to OSD
Language and press the right arrow on the remote.
Highlight the appropriate language from those listed
and press OK to select.
INPUT SELECT
3D AUDIO
EQUALISATION
CHANNEL LEVELS
SUB OUT
POWER OPTIONS
OSD LANGUAGE
FIRMWARE UPDATE
FACTORY RESET
ENGLISH
华语
NEDERLANDS
FRANÇAIS
DEUTSCH
ITALIANO
日本語
PORTUGUÊS
РУССКИЙ
ESPAÑOL
15