3D Audio; Equalisation - Monitor Audio ASB-2 User Manual

3D Audio

3D Audio changes the surround effect for all inputs.
Each input can have its own 3D effect added and
saved. The Surround Effect will be the same for all
inputs though.
INPUT SELECT
3D AUDIO

EQUALISATION

CHANNEL LEVELS
SUB OUT
POWER OPTIONS
OSD LANGUAGE
FIRMWARE UPDATE
FACTORY RESET
2 Channel Audio
When turned on, the 3D Audio creates a wider stereo
image than would normally be heard.
HINT
It will not create "extra" channels for the rear
and centre.
Off
On
5.1 or 7.1 Channel Audio
When fed with a multi-channel surround signal, the 3D
effect can be turned on or off.
With 3D off the left, right, centre and LFE channels will
be heard without any processing.
When turned on a wide stereo effect is applied to
the left and right channels as with a 2 channel signal.
In addition to this the surround channels will be
introduced with virtual surround processing applied to
create the impression of a 5.1 surround system. The
level of this virtual surround effect can be adjusted to
make it more or less pronounced.
16
INPUT SELECT
3D AUDIO
EQUALISATION
CHANNEL LEVELS
SUB OUT
POWER OPTIONS
OSD LANGUAGE
ON
FIRMWARE UPDATE
OFF
FACTORY RESET
SURROUND EFFECT
ON
OFF
SURROUND EFFECT
Examples
3D Audio Off.
3D Audio On.
Equalisation
This allows the bass, mid-range and treble levels to
be adjusted to your tastes/ environments. They each
have independent attenuation and gain from -10 to
+10dB.
HINT
Any adjustments made will effect all input
sources. It is not possible to have seperate
equalisation settings for each input.
INPUT SELECT
3D AUDIO
EQUALISATION
CHANNEL LEVELS
SUB OUT
POWER OPTIONS
OSD LANGUAGE
FIRMWARE UPDATE
FACTORY RESET
HIGH
NORMAL
LOW
BASS LEVEL
MID LEVEL
TWEETER LEVEL
0