Selecting Automatic Or Manual Satellite Switching - KVH Industries M5 User Manual

Selecting Automatic or Manual Satellite Switching

When your TracVision system was configured, the satellite switching
method (automatic or manual) was also selected. However, you can
use the flowchart in Figure 3-26 to change the satellite switching
method for your selected service, if desired.
NOTE: While most TracVision configurations support automatic switching,
Custom Dual-Sat configurations and any configurations with a multiswitch
installed require manual switching. For more information on satellite
switching options for your selected configuration, refer to the applicable
service setup instructions in this chapter.
Figure 3-26 Setting the Satellite Switching Method
<Default Display>
Install Satellite? Install Satellite?
Yes Yes
Set Sat Switch Type?
Yes
Sat Switch: Auto
Auto
Menu
Next Return Next Return
Next Return
Choose your satellite
switching method, then
Enter Manual
press Enter.
TracVision M5/M7 User's Guide
Chapter 3 - Settings
53