Maintenance - Dimplex DS5598 Owner's Manual

Battery Replacement
To replace the battery:
1. Slide battery cover
open on the hand held
transmitter (figure 3).
2. Correctly install one
12 Volt (A23) battery in
the battery holder.
3. Close the batter cover.

Maintenance

WARNING: Disconnect
power before attempting any maintenance or cleaning to reduce the
risk of fire, electric shock or damage to persons.
Light Bulb Replacement
Allow at least five (5) minutes for light bulbs to cool off before touching
bulbs to avoid accidental burning of skin.
Light bulbs need to be replaced when you notice a dark section of
the flame or when the clarity and detail of the log exterior disappears.
There are two bulbs under the log set which generate the flames and
embers.
Tool Requirements: Phillips screw driver
Helpful Hints
It is a good idea to replace all light bulbs at one time if they are close to
the end of their rated life. Group replacement will reduce the number
of times you need to open the unit to replace light bulbs.
Upper Light Bulb Requirements
Quantity of one (1) clear chandelier or candelabra bulbs with an E-12
(small) socket base, 7 Watt rating.
Upper Bulb Replacement
1. Open door by pulling the handle.
Figure 3
ON
Button
OFF
Button
9
Battery
Battery
Cover